Thought I’d share a picture of my finished MIDI Slider Box. Really pleased with how it came out considering the limited tools I had access to.
I did initially have a problem with the sliders, but determined the wiper and pos (+) connections were wrong. In the instructions, it shows the wiper as the more central of the two terminals, but in the photos, the wiper is the outside terminal. I switched mine around, and voila, it works perfectly now.
Time for a new project, inspired by this post on Gearslutz. A custom DIY MIDI controller featuring three full size 100mm sliders and based on a Teensy 3.2. This will be used to control MIDI CC’s for my Kontakt libraries.
I sourced components as close as I could to the original post. The Teensy was from Amazon, the sliders and case from Farnell and I’m just waiting for some black 8mm slider knobs from eBay. Was difficult to find 100mm sliders and a case with the right dimensions in the UK so I’ve posted links below.
Cost so far is around £50, but I already had some of the components such as LED, USB connector etc. Still quite reasonable though and I’m surprised something like this doesn’t already exist in the market.